22
ON
OFF
9. STANDARD FOLDING OF STANDARD PAPER
Standard folding of standard paper is the basic operation of this unit.
9-1. Standard Paper
The standard paper designated by this unit
consists of the following five types: LGR, LGL,
LTR, STMT, and INV.
All of these sizes are valid only when stacked
on the paper feed tray in the short edge
feeding direction.
The above standard paper may not be usable for
certain paper thickness in some cases.
(Refer to “22. SPECIFICATIONS” (
☞
p.59).)
NoteNote
9-2. Standard Folding Modes
Six standard folding modes are available as shown below.
Single fold Double fold Irregular
accordion fold
Letter fold
Accordion
fold
Brochure
fold
9-3. Operation Procedure
Turn on the power switch.
1
Do not touch the power switch with
wet hands. Otherwise electric
hazards may occur.
WARNING
!
Power switch
Stack paper on the paper feed tray.
Do not overstack paper. Paper can be stacked up to a
height of approx. 1.8".
Push in the paper until the lead edge touches the
paper feed inlet lightly.
2
Max. stacking amount: Approx. 1.8"
Paper size L × W
Ledger (LGR) 17" × 11"
Legal (LGL) 14" × 8.5"
Letter (LTR) 11" × 8.5"
Statement (STMT) 8.5" × 7"
Invoice (INV) 8.5" × 5.5"
To Next Page
Loading...
Need help?
General
