4.3 Type plate
The type plates are located outside on the hous-
ing of the control unit and on the X-ray emitter.
1 Unit type plate
2 X-ray emitter type plate
4.4 Evaluation of conformity
This device has been subjected to conformity
acceptance testing in accordance with the cur-
rent relevant European Union guidelines. This
equipment conforms to all relevant requirements.
The VistaIntra DC has been developed and man-
ufactured according to the following specifica-
tions:
– Protection against water penetration: Not pro-
tected: IPX0
– Protection against electric shock: Protection
class I device, Type B application part
The CE mark declares that the product satisfies
the applicable requirements according to Direc-
tive 93/42/EU for medical products.
Product description
2202100028L02 2007V019 13
EN
To Next Page
Loading...
Need help?
General
