Durr Dental VistaIntra User Manual

8.4 Service menu settings
All settings are saved after the first triggering.
❯
While the button is pressed, also press the button longer in order to switch to the service
menu.
Browse in the menu with or .
Use to select the respective menu option.
❯
Under menu option 1. Cone Type, browse with and confirm with .
Use to return to the Service menu.
❯
Under menu option 2. DAP Setting, browse with and confirm with .
Use to return to the Service menu.
❯
Under menu option 3. Default Value Reset, confirm the resetting with
.
❯
Under menu option 4. kV Option, browse with and confirm with ; 50-70 kV are only permitted
for countries without restrictions of the German X-ray Act.
❯
Under menu option 5. X-ray Count, browse with
and confirm with .
❯
Under menu item 6. Exposure Set, make the relevant selection with and confirm with .
❯
The current firmware version can be read off under menu option 7. Version. Acknowledge with .
❯
Under menu option 8. Demo Mode the demo version can be started by pressing the
button.
❯
After inputting all values, exit the service menu with the button.
Assembly
20 2202100028L02 2007V019
EN

Durr Dental VistaIntra Specifications

General

Brand	Durr Dental
Model	VistaIntra
Category	Medical Equipment
Language	English