Eaton EASY-E4-DC-12TC1 User Manual

3. Commissioning
3.4 Overview of switch-on behavior
3.4 Overview of switch-on behavior
The following figure shows what happens when the device is turned on.
l RUN start
l Card start
As soon as the easyE4 device starts, the options will be read.
The easyE4 basic device will check whether a microSD has been inserted and whether
there is a starting program on the microSD. The device will then switch to RUN or STOP
mode depending on these parameters.
easyE4 11/18 MN050009 EN www.eaton.com
85

Eaton EASY-E4-DC-12TC1 Specifications

General

Brand	Eaton
Model	EASY-E4-DC-12TC1
Category	Relays
Language	English