17
Status and Alarms
Status and Alarms
UPS input measurements
UPS output measurements
Battery measurements
Local personalization
Output personalization
On/Off personalization
Battery personalization
Measurements
Personalization
4. Access to Maintenance and Personalization Data
Function Factory setting Other available settings
Language English French, Spanish, Portuguese
Audio alarm Enabled Disabled
w Press the Scroll button (25) several times until
the personalization menu is reached.
w Press the Enter button (26) to access the
different possibilities.
w Finally, confirm the selection by pressing the
Enter button (26) again.
4.1 Display Organization
4.2 Access to Measurements
Press the scroll button (25) to access any status conditions and alarms, then the measurements for voltage, current,
frequency, power output and battery backup time.
4.3 Personalization using the control panel
86-86710-00EN A02 - Page 21
86-86710-00 A02 UM.indd 21 14/01/2009 10:56:28
(This page left blank intentionally)
To Next Page
Loading...
Need help?
General
