EDAN SD3 Series User Manual

SD3 Series Ultrasonic Pocket Doppler User Manual Maintenance
- 28 -
ethanol (75%) or isopropanol (70%). Then wipe it dry with a dry cloth.
CAUTION
Pay attention not to immerse the probe socket into the disinfector.
5.4 Sterilization
Do not sterilize the Doppler, unless this is necessary according to your hospital regulation.
NOTE:
After cleaning or disinfection, check if the Doppler functions well. If any problem is
detected, please contact the manufacturer for service before reusing it.
Checking Item
Checking Method
Visual Check
Inspect the Doppler for any damage.
Function Check
Check if the Doppler can be switched on or off properly (see 3.4 Switching On
and 3.5 Switching Off). When the Doppler is switched on, check if the display
panel works as described in 2.2.2 Display Panel; touch the probe faceplate
gently with your hand and check if the Doppler gives out sound normally.

EDAN SD3 Series Specifications

General

Brand	EDAN
Model	SD3 Series
Category	Medical Equipment
Language	English