65Use instructions
3.1.1.24 Password setting
There are two levels of user privilege: USER and SYSTEM, which are both initially pro-
tected by the default password “0000”.
In this screen it is possible to define customized passwords by the user with “SYSTEM”
privileges.
Other parameters that can be set from this menu are the machine addresses (referen-
ce for communication with it).
3.1.1.25 Password recovery
If you lose your password, please contact Elenos.
Elenos must be given the “Unlock code” displayed on this screen.
Elenos will provide a password valid for 24 hours to be entered on the same screen
under the “Password Recovery” item.
The user must later define new passwords through the “Password Setting” screen.
3.1.1.26 UPS settings
Setting the target power to be used when the machine is working with an uninterrupti-
ble power source.
To Next Page
Loading...
Need help?
General
