67Use instructions
3.1.1.28 GSM field strength
Indicating if the equipment is enabled to broadcast and receive SMSs, if it is in calling
mode through the modem analog line.
The GSM coverage field is shown.
For further details, please see the “SMS list” paragraph.
3.1.1.29 -3dB alarm setting
Enabling the alarm -3dB to be sent by SMS.
This indicates that 2/3 of the power set has been exceeded.
3.1.1.30 String ID/Pager ID
Defining the workstation name and the codes to be viewed in the message strings.
3.1.1.31 Phone N.1 .. 5
Various SIM cards can “communicate” with the equipment (based on the customer
requirements).
The telephone numbers in international format and authorizations can be set in these
templates.
The number can be globally enabled for SMS transmission and reception (en), be ena-
bled to send commands (cm), be enabled to request and receive the machine status
(st), be enabled to receive the echo any of commands sent by other numbers (gl) and
be enabled to receive SMSs in text or digital format (PC.)
To Next Page
Loading...
Need help?
General
