18
English
BASIC
OPERATIONS
Manual brightness adjustment
([ ]
→
[ ]
→
[ ]
→
[Manual])
Use the [ / ] buttons on the operating panel or the
[
/ ] buttons on the remote control to change the level
of brightness. The brightness of the image will not change
automatically in response to the brightness of the shooting
environment.
Brightness of the screen is different
• Factory setting is set to [Auto].
• By setting [ ]
→
[ ]
→
[On], the setting details are displayed on the screen.
• To return to the factory settings, press the [ / ] buttons on the
operating panel at the same time, or select [Rst Brightness] from the
menu.
• In places where the object is exposed to bright sunlight (e.g. near a
window), or extremely bright lights, the brightness of the screen may not
dim sufficiently, even when the [ ] button on the operating panel or
the [ ] button on the remote control is pressed.
In such cases, to adjust the amount of light, close the curtains or move
the object away from the light.
N o t e
Brightness
>Auto
Manual
To Next Page
General
