38
English
ADVANCED
OPERATIONS
•
Formatting the SD card/USB flash drive.
When you need to format the SD card/USB flash drive, insert it into this product and excute
formatting.
①
Press the [
] button on the operating panel or [ ] button on the remote control to
switch the output image to Play mode.
②
Press the [
] button on the operating panel to display the menu.
③
From the menu, select [ ] to switch the menu.
④
Select [ ] from the menu.
⑤
Select [ ] to start formatting. If you do not want to format, select [ ]
.
N o t e
Saving images
Picture
Basic operations
①
Press the [ ] button on the operating panel or the
[
] button on the remote control.
②
Make sure that the menu is not displayed on the screen
and press the [
] button on the operating panel or
the [
] button on the remote control.
If the menu is displayed on the screen, do the above -
operation after hiding the menu by pressing the [
] on
the operating panel.
To Next Page
General
