Elo TouchSystems i-series 4.0 User Manual

UM600410 Rev 02 page 10 of 75
User Manual –i-series 4.0
Unpacking
Verify that the box contains:
• Elo i-series 4.0
• Power Brick
• Region Specific power cable
• Quick Install Guide
Remove all protective materials from the device.
Inspect the device for damage.
Report immediately if system has damage and/or missing items as listed above.
How to Install Power over Ethernet
• Unscrew the PoE cover from the back of the device.
• Mount the PoE module so that the pins line up with the mating receptacle.
Power Button
Note: As soon as power is applied to the system, the device will boot up.
Do not touch the screen during system boot up.
• To turn ON the system, press power button for 500 milliseconds.
• To Shut down or Restart, press and hold the power button for more than 2 seconds and follow the on-screen display menu.
• To force the system to Shutdown, press and hold the power button for 12 seconds.
• To bring the system out of sleep/standby mode, either press the power button once or touch the screen.
Power LED Status
POWER LED STATUS DESCRIPTION
OFF OFF
Solid White Power ON
Solid Orange Power OFF
Blinking White Idle Mode

Elo TouchSystems i-series 4.0 Specifications

General

Brand	Elo TouchSystems
Model	i-series 4.0
Category	Touchscreen
Language	English