Elo TouchSystems i-series 4.0 User Manual

UM600410 Rev 02 page 24 of 75
User Manual –i-series 4.0
Connected devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter Android Settings → Connected devices →
USB
Note: To activate the USB settings, connect the USB cable from the i-series 4.0 to another device or PC. Once the i-series detects the external
computer, it will become available in the USB preference settings.
• Tap USB.
• From USB Preferences under USE USB FOR choose and tap a feature to enable.
Bluetooth
Note: Make sure the BT device is on and is discoverable.
• Tap Connection preferences.
• Tap Bluetooth.
• Tap toggle switch to ON .
• Tap + Pair new device.
• From Available devices screen, tap a device to pair.
• When a pairing request message appears.
• Verify the pairing number is the same.
❖ File transfer – This will share i-series 4.0 internal and SD shared storage.
❖ USB tethering – This will share internet network connection.
❖ MIDI - Musical Instrument Digital Interface.
❖ PTP - Picture Transfer Protocol.
❖ No data transfer – (Default Setting) No data will be transferred even if the USB cable is
connected.

Elo TouchSystems i-series 4.0 Specifications

General

Brand	Elo TouchSystems
Model	i-series 4.0
Category	Touchscreen
Language	English