Configuration
[54]
Figure 8-18:
8.5.2 Basic
Button Close configuration
Enter general machine and plant information.
Figure 8-19: Basic
Name Enter the converter name or a short description of the measurement.
Machine Enter the machine designation.
Area Enter a name or a short description of the area where the machine is
located.
Plant Enter the plant/factory name.
User (last
change)
Date (last
change)
8.5.3 Input
The name of the user who made the last configuration is displayed here.
The user name of the login data of the operation system is used for this
automatic entry. It is not possible to change the content of this field.
The date and time of the last converter configuration is displayed here.
Time and date of the configuration PC is used. It is not possible to
change the content of this field.
Define the eddy current sensor to be connected.
To Next Page
Need help?
General