General
[1]
1 General
Topics covered in this chapter:
•
Using this manual
• Symbols
•
Liability and guarantee
•
Incoming goods inspection
•
Technical support
•
Storage and transport
•
Disposal of the device
•
China RoHS Compliance
•
Installation awareness
1.1
Using this manual
This manual contains information concerning the use of the device.
Read the operating manual completely prior to starting installation and operating the
device. Comply with all safety instructions.
This operating manual applies for EZ 1000 Converters with serial numbers 0000690 to
0001029 and P181900XXX. See type plate for serial number.
Include the operating manual when transferring the device to third parties.
Note
When requesting technical support, please indicate type and serial number from the type plate.
Table 1-1
shows a list of documents that are referred to in this operating manual.
Table 1-1: Referenced documents
MHM-97879 Operating Manual Machine Studio - General Functions
MHM-97883 Installation Guide EZ 10xx, Eddy Current Sensors
Note
Chapter 6
and
Chapter 7
are only valid for EZ 1000 Converters labeled as an Ex ia or Ex nA device.
To Next Page
Loading...
Need help?
General