Micro Motion
®
Model D and DT Sensors Instruction Manual 11
Location continued
Hazardous area installations
Make sure the hazardous area specified on the sensor approvals tag is
suitable for the environment in which the sensor is installed. (See
illustrations on pages 3-6.) For installation in an area that requires
intrinsic safety, refer to Micro Motion hazardous approval
documentation, shipped with the sensor or available from the Micro
Motion web site.
For hazardous installations in Europe, refer to standard EN 60079-14 if
national standards do not apply.
If you don’t have access to the World Wide Web, you can obtain an I.S.
manual by contacting the Micro Motion Customer Service Department:
• In the U.S.A., phone 1-800-522-MASS (1-800-522-6277), 24 hours
• In Canada and Latin America, phone +1 303-527-5200 (U.S.A.)
• In Asia, phone +65 6777-8211 (Singapore)
• In the U.K., phone 0870 240 1978 (toll-free)
• Outside the U.K., phone +31 (0) 318 495 555 (The Netherlands)
To Next Page
Loading...
Need help?
General
