Micro Motion
®
Model D and DT Sensors Instruction Manual 61
Appendix
C Label Maintenance and
Replacement
Maintaining and replacing labels
Micro Motion product safety labels have been designed in accordance
with the voluntary standard, ANSI Z535.4. If any of the labels illustrated
below is illegible, damaged, or missing, promptly have a new one
installed. The sensor includes the safety labels illustrated below.
Contact Micro Motion for replacement labels:
• In the U.S.A., phone 1-800-522-MASS (1-800-522-6277), 24 hours
• In Canada and Latin America, phone +1 303-527-5200 (U.S.A.)
• In Asia, phone +65 6777-8211 (Singapore)
• In the U.K., phone 0870 240 1978 (toll-free)
• Outside the U.K., phone +31 (0) 318 495 555 (The Netherlands)
• Or visit our website at www.micromotion.com.
Label number 1003972
For additional information, see Removing a purge plug and Case
purging procedure, page 56.
Label number 1004570
CAUTION: Removal of plugs will require sensor case to
be repurged with a dry inert gas.
!
WARNING: Improper pressurization may result in
injury. Refer to sensor manual for repurging instructions.
Part No. 1003972, Rev. B
To Next Page
Loading...
Need help?
General
