[] DTV Closed Caption
Inadditiontothe basicclosedcaption describedonpage19,DTVhasits
ownclosedcaptioncalledDTVCC.Usethismenutochangethe settingsfor
DTVCC
3 Press [SETUP] to exit. 1 Press [SETUP] to display the main menu.
Note:
• To show the closed caption on your TVscreen, broadcast
signal must contain the closed caption data,
• Not all TVprograms and commercials have the closed
caption or all types of the closed caption,
• Captions and texts maynot match the TVvoice exactly,
• Changing channels may delay the closed caption for a few
seconds,
• Adjusting or muting the volume may delay the closed
caption for a few seconds,
• Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
action. This is not a problem with the unit.
• The caption or text characters will not be displayed while
the main menu or functions display is shown.
• Ifa black box appears on the TVscreen, this means that
the closed caption is set to the text mode. To clear the box,
select "CAPTION 1" "CAPTION 2" or "OFF"
• If the unit receives poor quality television signals, the
captions may contain errors, or there might be no captions
at all Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
• The unit retains the closed caption setting if the power fails.
• When the unit receives a special effects playback signal
(I.e.,Search, Slow and Still) from a VCR's video output
channel (CH3 or CH4), the unit may not display the correct
caption or text.
2 Use [Cursor • / V] to select"DTVCC",
then press [ENTER].
e.g.) digital TV mode
or
- TVSETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
RACK LIGHT [BRIGHT]
COLOR TEMR [NORMAL]
_" DTVCC
Use [Cursor • / V] to select"CAPTION SERVICE",
then press [ENTER] repeatedly to change the setting.
or
-DTVCC -
,_ CAPTIONSERVICE [OFF]
USER SETTING [OFF]
CAPTION SIZE [MIDDLE]
FONT STYLE [STYLE1/8]
CHARACTEREDGE [NONE]
FORE OPACffY [SOLID]
FORE COLOR [WHITE]
BACK OPACITY [SOLID]
BACK COLOR rBLACK1
CAPTION SERVICE
OFF
SERVICE1 N6
Select if you do not want
DTVCC. This is the default.
Select one of these before
changing any other item in
"CAPTION" menu. Choose
"SERVICE1/6" under normal
circumstances.
Press [SETUP] to exit.
Note:
• "CAPTIONSERVICE"that you can switch differs depending
on the broadcast description.
EN
To Next Page
Loading...
Need help?
General
