ENSONIQ SQ-R User Manual

SQ-R Musician's Manual
Filter Bank
The filter settings determine which ranges of frequencies will be allowed to pass
through to die output. Drum sounds always have a fixed 4 pole low pass filter.
See the Filter Bank description in the Standard sound programming section for
further details.
Fc Cutoff/LevV
Filter Bank
Fc Cutoff
Filter Cutoff Frequency — Determines the initial, or manual, filter cutoff
frequency. A setting of 127 lets all the original signal pass through the filter.
Lower settings lower the cutoff frequency, somewhat like turning down the treble
on a stereo.
Range: 000 to 127
LevV
Velocity Level Control — The Velocity level parameter will lower all filter cutoffs
with a softer keystrike. This means that the setting you assign to Fc Cutoff is the
maximum level, the level that will be reached with the hardest keystrikd. The v
amount of "LevV" will determine how much that level will be reduced as you play
softer. With this parameter you can have continuous dynamic control over the
filter cutoff by varying how hard you play.
Range: 00 to 99
7 - 8 Drum Programming

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English