ENSONIQ SQ-R User Manual

SQ-R Musician's Manual
Section 1 - Getting Started
Section 1 — Getting Started
Power 1-1
Grounding Information 1-1
AC Line Conditioning 1-2
Temperature Guidelines 1-3
Basic Connections 1-3
Running Your SQ-R Through a Home Stereo System .... 1-4
Rear Panel Connections 1-5
The Front Panel — Communicating with the SQ-R 1-6
Select Sound Button 1-7
Edit Sound Button 1-7
Select Preset Button 1-7
Edit Track Button 1-7
Track Buttons 1-8
System Button # 1-8
Effects Button ' 1-8
Enter/Save Button 1-8
Bank Select Button 1-8
Arrow Buttons 1-9
Volume Knob 1-9
Phones 1-9
Parametric Programming 1-10
Screens 1-10
Multiple Parameters 1-10
Changing a Parameter 1-10
Playing Sounds:
Sound Memory 1-12
Selecting a Sound 1-12
Choosing Internal, ROM, Card and Drum Sounds .... 1-12
Memory Cards 1-13
Reinitializing the SQ-R 1-13
Low Battery Voltage — When to Replace the Battery .... 1-14
SQ-R Accessories 1-14
NeedMoreHelp? 1-15
Power
Insert the line cord into the line receptacle on the rear panel of the SQ-R. Plug the
other end of the cable into a grounded AC outlet. (The proper voltage for your
SQ-R is listed on the Serial Number label on the side panel.) Turn the SQ-R
power on and make sure the display lights up. If not, check your connections
and power source.
Grounding Information
Like many modern electrical devices, your SQ-R has a three-prong power cord
with earth ground to ensure safe operation. Some products have power cords
with only two prongs and no earth ground. To ensure safe operation, modern
products with two-prong power cords have polarized plugs that can only be
inserted into an outlet the proper way.
Power
1 - 1

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English