ENSONIQ SQ-R User Manual

Section 4 - Effects SQ-R Musician's Manual
Sound Effects
Each sound in the SQ-R contains an effect and a complete set of parameter values
which determine how that effect will sound. The effect is present even if none of
the voices in the sound are routed through the effect (e.g. all voices are sent to the
DRY destination bus - see the Output bank in section 6). Whenever you save or
write
a sound, the effect settings are also saved with the sound.
The sound effect is displayed and edited by pressing the Effect button while in
Sound Edit mode. The parameters that pertain to each effect are described in the
Effect Parameters part of this section.
Preset Effect
Each preset contains an effect and a complete set of effect parameter values. The
effect is present even if none of the tracks in the preset are routed through the
effect (e.g. all tracks are sent to the DRY destination bus). This effect applies to
all preset tracks (or their sound voices) which are routed to either FX destination
bus.
The effect is saved with each preset. It will remain unaffected until a new preset
is selected, unless it is specifically edited. A special program change message
may be used to load new effects into a preset from MIDI in MULTI mode (see the
description of special program changes in the Section 2 — System Control)-
The preset effect is displayed and edited by pressing the Effect button when the
SQ-R is in Preset mode.
4 - 2 Understanding SQ-R Effects

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English