ENSONIQ SQ-R User Manual

Section 3 - Presets
SQ-R Musician's Manual
r
Performance Parameter Banks (Parameter and Mix)
In order to edit any of the performance parameters described below, you must
first press the Edit Track button. The LED above that button will light,
indicating that the SQ-R is in Preset Edit mode.
Parameter Bank
The parameter bank is used to define performance controls within each track of a
preset.
Transpose
Parameter Bank
Transpose
Warning:
The top line of the display indicates the track which is being edited and the play
status of the track. This line is the same on each screen within the bank.
Track 1 ON
Transpose=+@ +00
Octave! 1 Semitone!
Each track can have its pitch transposed (raised or lowered) by octaves and
semitones within an eight octave range. The transpose setting affects both the
pitch played by local SQ-R voices and the key number transmitted via MIDI.
Ranges: Octave parameter
Semitone parameter
-4 to +4 octaves
-11 to +11 semitones
You should take care never to transpose a track whose status is MIDI or BOTH
while that track is receiving incoming MIDI data. This could cause the key-up
events to be missed, causing notes to "hang."
3 - 8
Performance Parameters

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English