Enterasys SecureStack B2 B2G124-48P User Manual

How to Use This Guide
xvi About This Guide
How to Use This Guide
Readthroughthisguidecompletelytofamiliarizeyourselfwithitscontentsandgainan
understandingofthefeaturesandcapabilitiesofthestackableEthernetswitch.Ageneral
knowledgeofdatacommunicationsnetworksishelpfulwhensettinguptheswitch.
Thisguideprovidesinformationaboutthefollowing:
Related Documents
Thefollowingdocumentscanhelpyoutosetupandmanagetheswitch:
SecureStackB2ConfigurationGuide
CablingGuide
ThemanualslistedabovecanbeobtainedfromtheWorldWideWebinAdobeAcrobat
PortableDocumentFormat(PDF)atthefollowingsite:
http://www.enterasys.com/support/manuals
UnliketheSecure StackB2ConfigurationGuide,clickonOverviewGuides
atthemanualsweb
sitetofindtheCablingGuide.
For... Refer to...
An overview of the switch features and how to
obtain technical support
Chapter 1, Introduction
Network requirements that must be met before
installing the switch
Chapter 2, Network Requirements
Instructions to install the switch on a flat surface
or in a standard 19-inch rack, and configure the
switch in a stacked configuration. A description of
Power over Ethernet (PoE) is also provided.
Chapter 3, Hardware Installation
Troubleshooting installation problems and
diagnosing network/operational problems using
the LANVIEW LEDs
Chapter 4, Troubleshooting
Specifications, environmental requirements, and
physical properties of the switch and optional
Mini-GBICs
Appendix A, Specifications

Enterasys SecureStack B2 B2G124-48P Specifications

General

Brand	Enterasys
Model	SecureStack B2 B2G124-48P
Category	Switch
Language	English