Safety and operating instructions
44 © Construction Tools GmbH | 3390 5149 01 | 2020-09-22
Original Instructions
9 Repair
DANGER Danger of electric shock
Working on a powered Hydro Magnet can cause a lethal
electric shock.
u Perform repair work on a Hydro Magnet only in the
turned-off and de-energized state.
u Secure the carrier against unintentional starting (for
example by removing the ignition key and keeping it
safe).
WARNING Risk of injury
Non-professional repair of the Hydro Magnet may lead to
serious injury and property damage.
u Repair is only permitted if carried out by profession-
als trained by Construction Tools GmbH. These pro-
fessionals must follow all safety instructions and
guidelines for repair.
u Consult the Epiroc Customer Center / Dealer in your
area.
9.1 Sending in the hydraulic
attachment for repairs
NOTICE Mixed hydraulic oil
Never mix mineral and non-mineral hydraulic oils! Even
small traces of mineral oil mixed in with non-mineral oil
can result in damage to both the hydraulic attachment
and the carrier. Non-mineral oil loses its biodegradability.
u Only use one type of hydraulic oil.
n
Always specify which hydraulic oil has been used
when sending in the hydraulic attachment to have it
repaired.
To Next Page
Loading...
Need help?
General
