Safety and operating instructions
46 © Construction Tools GmbH | 3390 5149 01 | 2020-09-22
Original Instructions
11 Disposal
NOTICE Environmental damage due to consumables
Hydraulic oil and cutter grease are environmentally
harmful and must not penetrate the ground or enter the
water table or water supplies.
u Collect any such consumables which may escape.
u Dispose of them in accordance with the applicable
environmental regulations.
11.1 Hydro Magnet
n
Remove the Hydro Magnet from the carrier (see
chapter Removing the hydraulic attachment from
the carrier).
n
Remove the adapter plate (see chapter Removing
the adapter plate).
n
Remove the hydraulic hoses from the Hydro magnet.
n
Dispose of the Hydro Magnet in line with all applica-
ble regulations or consult an authorised and spe-
cialised recycling company.
11.2 Hydraulic hoses
n
Drain the hydraulic oil from the hydraulic hoses and
collect it.
n
Dispose of the hydraulic hoses in accordance with
the applicable regulations to avoid environmental
hazards.
11.3 Hydraulic oil
n
Collect any hydraulic oil that escapes.
n
Dispose of it in accordance with the applicable envi-
ronmental regulations.
To Next Page
Loading...
Need help?
General
