Wireless Network Projection from a Mobile Device (Screen Mirroring)
115
i
Select the Display setting as necessary.
• Display PIN Code lets you display the PIN code on the projected
image while projecting input sources other than Screen Mirroring.
• Display Device Name lets you display the newly connected device
name on the projected image.
j
When you finish selecting settings, select Set and follow the on-screen
instructions to save your settings and exit the menus.
k
Press the [Home] button on the control panel or remote control. The
settings are complete when you see the Display Name on the Home
screen.
Connecting Using Screen Mirroring in Windows 10
You can set up your computer for wireless projection and play audio through
the projector's speaker system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings on your projector as necessary.
b
Press the [LAN] button on the remote control to switch to the Screen
Mirroring source.
You see the Screen Mirroring standby screen.
c
Display Action Center, and then select Connect.
You see a list of available devices.
d
Select the projector's Display Name from the list.
e
If you see the PIN entry screen on your computer, enter the PIN code
displayed on the Screen Mirroring standby screen or at the bottom
right of the projected image.
The projector displays the image from your computer.
To Next Page
Loading...
Need help?
General
