EasyManuals Logo
Home>Epson>Projector>EH-TW6100W

Epson EH-TW6100W User Manual

Epson EH-TW6100W
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Adjusting the Image
37
Setting Auto Iris
By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy
deep and rich images.
You can select the luminance adjustment tracking for changes in brightness in the displayed image from
Normal to High Speed.
(Depending on the image, you may hear the auto iris operating, but this is not a malfunction.)
a
Press the button.
c
You can make settings from the
configuration menu.
s
Image -
Auto Iris p.66
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
Super-resolution
This setting sharpens blurred images, enhancing the apparent detail of the image by increasing the resolution
of the image signal.
Depending on the image, distortion at the edge of the image may be enhanced. If you notice any distortion,
set it to "0".
a
Press the button.
c
You can make settings from the
configuration menu.
s Signal -
Super-resolution p.68
This cannot be set when a
computer image signal is being
input.
b
Use the buttons to make
adjustments.
The higher the number, the stronger the
effect.
c
Press the button to exit the
menu.

Table of Contents

Other manuals for Epson EH-TW6100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW6100W and is the answer not in the manual?

Epson EH-TW6100W Specifications

General IconGeneral
Aspect ratio16:9
RS-232 ports1
Matrix size0.61 \
White light output2300 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.4 - 14.5 m
Projection distance (wide)0.9 - 8.9 m
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range18 - 29 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity0
Noise level32 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)24 dB
RMS rated power20 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)358 W
Power consumption (economy mode)274 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Cables includedAC, HDMI
Pallet width800 mm
Pallet height2010 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet (UK)24 pc(s)
Quantity per pallet layer2 pc(s)
Quantity per pallet layer (UK)4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth365 mm
Width420 mm
Height137 mm
Weight6000 g
Package depth495 mm
Package width435 mm
Package height310 mm
Package weight9720 g

Related product manuals