EasyManuals Logo
Home>Epson>Projector>EH-TW6100W

Epson EH-TW6100W User Manual

Epson EH-TW6100W
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Maintenance
89
d
Hold the air filter with the surface
facing down and tap it 4 or 5 times to
remove the dust.
Turn it over and tap the other side in the
same way.
Attention
If the air filter is hit too hard, it may
become unusable due to deformities
and cracks.
e
Remove any dust remaining on the air
filter by using a vacuum cleaner from
the front side.
f
Install the air filter into the air filter
cover.
Insert the protruding section of the air filter
into the hole in the cover, and then press it
in firmly.
g
Install the air filter cover.
Press the cover until it clicks into place.
Cleaning the main unit
Clean the projector's surface by wiping it gently with a soft cloth.
If it is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and
then firmly wring the cloth dry before using it to wipe the surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the projector's surface. The quality
of the case may change or the paint may peel off.

Table of Contents

Other manuals for Epson EH-TW6100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW6100W and is the answer not in the manual?

Epson EH-TW6100W Specifications

General IconGeneral
Aspect ratio16:9
RS-232 ports1
Matrix size0.61 \
White light output2300 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.4 - 14.5 m
Projection distance (wide)0.9 - 8.9 m
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range18 - 29 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity0
Noise level32 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)24 dB
RMS rated power20 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)358 W
Power consumption (economy mode)274 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Cables includedAC, HDMI
Pallet width800 mm
Pallet height2010 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet (UK)24 pc(s)
Quantity per pallet layer2 pc(s)
Quantity per pallet layer (UK)4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth365 mm
Width420 mm
Height137 mm
Weight6000 g
Package depth495 mm
Package width435 mm
Package height310 mm
Package weight9720 g

Related product manuals