EasyManuals Logo
Home>Epson>Projector>EH-TW6100W

Epson EH-TW6100W User Manual

Epson EH-TW6100W
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Troubleshooting
85
Problems with 3D
Cannot project correctly in 3D
Check Remedy
Are the 3D Glasses turned on? Turn on the 3D Glasses.
Is a 3D image being projected? If the projector is projecting a 2D image, or if an error occurs on
the projector that prevents the 3D image from being projected,
you cannot view 3D images even if you are wearing the 3D
Glasses.
Is the input image in 3D? Check that the input image is 3D compatible.
Is 3D Display set to Off?If 3D Display is set to Off from the configuration menu, the pro-
jector does not automatically change to 3D even when a 3D im-
age is input. Press the
button. s Signal - 3D Setup - 3D
Display p.68
Is the correct 3D format set? The projector automatically selects the appropriate 3D format,
but if the 3D image is not displayed correctly, use 3D Format
from the configuration menu to select another format.
s Sig-
nal - 3D Setup - 3D Format p.68
Are you viewing within the reception range? Check the range within which the 3D Glasses can communicate
with the projector, and view within that range.
s p.44
Has pairing been performed correctly? See the User's Guide for the 3D Glasses to perform pairing.
Are there any devices that cause radio wave
interference in the vicinity?
When using other devices at the same time with the frequency
band (2.4 GHz) such as Bluetooth communication devices, wire-
less LAN (IEEE802.11b/g), or microwave ovens, radio wave inter-
ference may occur, the image may be interrupted, or communi-
cation may not be possible. Do not use the projector near these
devices.
Problems with HDMI
HDMI link does not function
Check Remedy
Are you using a cable that meets the HDMI
standards?
Operations are not possible with cables that do not meet the
HDMI standards.
Does the connected device meet the HDMI
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, press the
button, and then check if the device is
available under Device Connections.
s p.59
Are the cables connected correctly? Check that all the cables required to use HDMI Link are securely
connected.
s p.59
Is the power for the amplifier or DVD recorder
and so on turned on?
Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.
If you have connected a speaker and so on, set the connected
equipment to PCM output.

Table of Contents

Other manuals for Epson EH-TW6100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW6100W and is the answer not in the manual?

Epson EH-TW6100W Specifications

General IconGeneral
Aspect ratio16:9
RS-232 ports1
Matrix size0.61 \
White light output2300 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.4 - 14.5 m
Projection distance (wide)0.9 - 8.9 m
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range18 - 29 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity0
Noise level32 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)24 dB
RMS rated power20 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)358 W
Power consumption (economy mode)274 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Cables includedAC, HDMI
Pallet width800 mm
Pallet height2010 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet (UK)24 pc(s)
Quantity per pallet layer2 pc(s)
Quantity per pallet layer (UK)4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth365 mm
Width420 mm
Height137 mm
Weight6000 g
Package depth495 mm
Package width435 mm
Package height310 mm
Package weight9720 g

Related product manuals