EasyManuals Logo
Home>Epson>Projector>EH-TW6100W

Epson EH-TW6100W User Manual

Epson EH-TW6100W
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Troubleshooting
86
Check Remedy
Was a new device connected, or was the con-
nection changed?
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Are many multi-media players connected? Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
The device name is not displayed under Device Connections
Check Remedy
Does the connected device meet the HDMI
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
Problems with WirelessHD (EH-TW6100W only)
Cannot project WirelessHD images
Check Remedy
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
If the cable does not meet the HDMI standards, operations are
not possible.
Is WirelessHD set to Off? When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
button. s Settings -
WirelessHD p.71
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.54
Is the supplied WirelessHD Transmitter
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
No AV device is connected. Check that the HDMI cable is securely
connected.
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
WirelessHD audio is not output correctly
Check Remedy
Is audio output when the WirelessHD is con-
nected?
Set the connected equipment to PCM output.

Table of Contents

Other manuals for Epson EH-TW6100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW6100W and is the answer not in the manual?

Epson EH-TW6100W Specifications

General IconGeneral
Aspect ratio16:9
RS-232 ports1
Matrix size0.61 \
White light output2300 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.4 - 14.5 m
Projection distance (wide)0.9 - 8.9 m
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range18 - 29 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity0
Noise level32 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)24 dB
RMS rated power20 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)358 W
Power consumption (economy mode)274 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Cables includedAC, HDMI
Pallet width800 mm
Pallet height2010 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet (UK)24 pc(s)
Quantity per pallet layer2 pc(s)
Quantity per pallet layer (UK)4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth365 mm
Width420 mm
Height137 mm
Weight6000 g
Package depth495 mm
Package width435 mm
Package height310 mm
Package weight9720 g

Related product manuals