EasyManuals Logo
Home>Epson>Printer>IP-100

Epson IP-100 User Manual

Epson IP-100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
2
Direct Printing Introduction
2-5
Available Paper
The type and quality of paper determines the finish of your prints.
Before use, be sure to read the following information and select
the correct paper for your needs. This printer can print out
photographs directly with PC cards in three sizes: 105 x 148 mm
(A6), 114 x 175 mm (4 x 6 inch) and 210 x 297 mm (A4).
Note:
You should only use print media at normal room temperature and
humidity: 15 to 25°C (59 to 77°F) and 40 to 60%RH.
Keep your fingers off the printable surface of the paper. Fingerprints
may deteriorate the print quality.
Plain paper (A4, A6, 4 x 6 inch)
When using the plain paper, note the following:
Use paper 64 to 90 g/m² in size and 0.08 to 0.11 in thickness.
Load paper up to the arrow mark.
EPSON special media
EPSON provides special paper that are formulated for the ink
used on EPSON ink jet printers. EPSON recommends you to use
media distributed by EPSON to ensure high-quality results.
Before loading special paper distributed by EPSON, read the
instruction sheets packed with your special media first and keep
the following in mind.
The following table lists available media type and size when you
print directly from the PC cards. Find the best choice for your
printing needs.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson IP-100 and is the answer not in the manual?

Epson IP-100 Specifications

General IconGeneral
BrandEpson
ModelIP-100
CategoryPrinter
LanguageEnglish

Related product manuals