Introducing the Supplied Software
Contents of the Software Disc
The supplied Software Disc contains the following software. Install as required.
More information be found in the Network Guide (pdf) or via online help for the application in question.
Note:
❏ The included software disc does not contain any printer drivers. A software RIP is required to print.
❏ Download the latest version of the software from EPSON's website.
Software Name Overview
Epson Driver and Utilities Installs the EPSON communications driver (EPSON SC-B6000 Series Comm Driver).
The Epson communications driver is required if the EPSON LFP Remote Panel 2 is to be
used to copy paper settings. It is not a printer driver. In addition, the software RIP may not
display printer status if the Epson communications driver is not installed when the printer
is connected to a computer via USB. See the software RIP documentation for more
information on the status display.
EPSON LFP Remote Panel 2 EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy paper
settings bank created in the printer’s setup menu to a computer.
U “Starting EPSON LFP Remote Panel 2” on page 19
U “Exiting EPSON LFP Remote Panel 2” on page 19
Epson Network Utilities Select this option during installation if the printer and computer are connected via a
network. Installing this utility allows a wizard to be used to simplify the process of setting
the addresses needed for network connections.
EpsonNet Config With this software, you can configure various network settings for the printer from your
computer. This is useful as it allows you to enter addresses and names using the keyboard.
The documentation is installed with the application.
SC-B6000 Series User’s Guide
Introduction
18
To Next Page
Loading...
Need help?
General
