Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configura-
tion
360 nozzles × 2 rows × 4 colors
(Black, Cyan, Magenta, Yellow)
Resolution (maxi-
mum)
720 × 1440 dpi
Control code ESC/P raster (undisclosed
command)
Paper feed method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible with the
USB 2.0 Specification.
100Base-TX/1000Base-T
*1
Rated voltage AC 100 to 240 V
Rated frequency
range
50 to 60 Hz
Rated current 1.0 to 0.5 A
Power consumption
In use Approximately 65 W
Sleep mode 3.0 W or less
Power off 0.4 W or less
Temperature Operating: 15 to 35°C (59 to 95°F)
Storage (before unpacking):
-20 to 60°C (-4 to 140°F) (within 120
hours at 60°C (140°F), within a
month at 40°C (104°F)
Storage (after unpacking):
-20 to 40°C (-4 to 104°F) (within a
month at 40°C (104°F))
Humidity Operating: 20 to 80% (without
condensation)
Storage (before unpacking): 5 to
85% (without condensation)
Storage (after unpacking): 5 to 85%
(without condensation)
Printer Specifications
Operating temperature/humidity
External dimen-
sions
(W) 1608 × (D) 917 × (H) 1,128mm
Weight
*2
90 kg
*1 Use a shielded twisted-pair cable (Category 5 or higher).
*2 Ink not included.
Ink Specifications
Type Dedicated ink pack
Dye ink Black, Cyan, Magenta, Yellow
Use by date See the date printed on the ink pack
(at normal temperature)
Storage
temperature
Uninstalled:
-20 to 40°C (within a month at 40°C)
Installed:
-20 to 35°C (within a month at 40°C)
Transporting:
-20 to 60°C (within a month at 40°C,
within 72 hours at 60°C)
Capacity 1000 ml
c
Important:
The ink will freeze if stored for a long period of time
at -20°C or below. If the ink is frozen, store for at
least 4 hours at room temperature (25°C) before
using. (With no condensation.)
SC-B6000 Series User’s Guide
Appendix
75
To Next Page
Loading...
Need help?
General
