Epson SC-F3000 Series Manual

Replacement
Procedure
Preparation
Use the following to do replacement work.
Replacement Print Head
Do not remove it from the protective case until just
before replacement.
Gloves (provided with replacement Print Head),
protective glasses and mask (commercially
available)
Prevent waste ink from coming into contact with your
skin or from entering your eyes or mouth.
Adjustment Film Sheet (1 sheet)
Use to check for clogged nozzles after replacing the Print
Head. Use the ones distributed during User Self Repair
training.
If you do not have any Adjustment Film Sheets on hand,
contact your dealer or Epson Support.
M size platen
Use one that has no grip pad on it.
Sprayer (commercially available)
Use the sprayer to dampen the platen with water to
position the Adjustment Film Sheet.
Notes on Handling
Print Heads are precision components.
When handling them, follow the procedures and
precautions in this manual.
Notes on Storage
❏ Do not open the outer carton or the protective case
before doing replacement work. There is a risk of
lint or dust getting on the nozzle surfaces and ink
supply ports.
❏ Store them in the following environment, away
from direct sunlight.
-20 ˚C to 60 ˚C (-4 ˚F to 140 ˚F) (without
condensation)
❏ Do not store in damp location.
❏ Store correctly in upright orientation.
❏ Do not stack more than 3 boxes.
Notes on Opening
❏ Confirm the box is upright before opening it.
❏ Use the outer carton, plastic bag, and protective
case to pack the used Print Head to send it to your
dealer or Epson Support. Open them carefully
without tearing anything.
❏ Do not open the protective case until you are ready
to replace the Print Head. There is a risk of lint or
dust getting on the nozzle surfaces and ink supply
ports.
SC-F3000 Series How to Replace the Print Head
Replacement Procedure
13

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English