Epson SC-F500 Series User Manual

Fitting Documents to the Width
of the Roll Paper
A
Check the document size (or paper size) setting
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer
driver from the application and check that the
document size is the same as the setting of the
application.
If it differs, click Settings... and specify the
correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 42
Mac
Open the page setup screen of the application
and check that this printer is selected in Printer
and check the paper size.
Select a paper size that does not have (Retain
Scale) or (Roll Paper Banner).
If the size is different, select the correct size from
the pull-down menu.
U “Basic Operating Procedures (Mac)” on
page 48
Note:
In the case of an application without a page setup
menu item, you can set the paper size if you open
the Print dialog box from the Print menu item.
B
Click Fit to Roll Paper Width on the Printer
Settings tab of the printer driver and select either
Fit Short Side to Roll Paper Width or Fit Long
Side to Roll Paper Width.
Windows
Mac
SC-F500 Series User's Guide
Printing with the Printer Driver from Your Computer
54

Epson SC-F500 Series Specifications

General

Brand	Epson
Model	SC-F500 Series
Category	Printer
Language	English