Settings item Setting/Additional Explanation
Advanced Paper Settings
Confirm ICC profile Displays the ICC profile name.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Confirm Color Density Displays the Color Density.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Paper Thickness 0.01 - 1.50 mm (0.01 mm units)/0.4 - 59.1 mil (0.1 mil units)
This item is only displayed for Custom Paper Setting.
Platen Gap Auto, 1.2, 1.6, 1.9, 2.1, 2.4
Select a wider setting if print results are scratched or smudged.
Paper Suction -4 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the setting.
Drying Time Drying Time per Pass, Drying time per page
You can set the drying time for each print head movement (pass) or the drying
time for each page.
Paper Size Check On, Off
When this is set to On, the width of the loaded paper is automatically detected.
Skew Reduction On, Off
Select whether to enable (On) or disable (Off) paper skew reduction while printing
on paper.
Paper Eject Roller Auto, Use, Do Not Use
Paper Feed Offset -1.0 - +1.53%
This item is only displayed for custom paper.
Restore Default Settings The advanced paper settings are saved for the paper type. Select this when you
want to restore the default settings.
This item is not displayed when Custom Paper is selected.
Change Paper Type/Paper Size
Paper Type Recently Used Paper, Recently Registered Paper, More Paper Types (Photo Paper,
Proofing Paper, Fine Art Paper, Matte Paper, Campus Paper, Plain paper, Others,
Custom Paper)
Paper Size A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series, Others,
User-Defined
Poster Board
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
104
To Next Page
Loading...
Need help?
General