D
Remove the optional auto take-up reel unit or
SpectroProofer mounter if they are installed.
U Setup Guide (booklet) supplied with
optional items
E
Unlock the casters.
F
Move the printer.
c
Important:
Use the casters to move the printer indoors a
short distance over a level floor. They can not
be used for transport.
Notes on Transporting
Make the following preparations in advance before
transporting the printer.
❏ Touch Maintenance - Keeping/Transporting
Preparation - Personal Transport Preparation
from the control panel. Ink is discharged. When the
ink has been discharged, the printer turns off.
❏ Disconnect all of the cables.
❏ Remove any paper.
❏ Remove any optional components if they are
installed.
To remove the optional components, see the Setup
guide included with each of them, and then reverse
the attachment procedure.
Furthermore, repack it using the original box and
packing materials to protect it from shock and
vibration.
When packing, make sure you install protective
material to secure the print head.
See the "Setup Guide" (booklet) supplied with the
printer for the installation method, and install in the
original location before the printer was removed.
Caution:
❏ The printer is heavy. When you pack or move
the printer, use four or more people when
carrying it. Also, make sure there is another
person to guide the people carrying the printer.
❏ When you lift the printer, maintain a natural
posture.
❏ When you lift the printer, place your hands at
the locations indicated in the following
illustration.
If you lift the printer while holding other
sections, you may be injured. For example, you
may drop the printer or your fingers may be
pinched when lowering the printer.
SC-P9500 Series/SC-P7500 Series User's Guide
Appendix
171
To Next Page
Loading...
Need help?
General