Printing Varieties
Printing with Darker
Tones of Black (Black
Enhance Overcoat)
Black Enhance Overcoat is a function that improves the
dynamic range by increasing the maximum density of
black by using Light Gray ink to overcoat dark and gray
areas in the prints.
Black Enhance Overcoat can only be used on glossy
paper. However, this cannot be used for some glossy
paper.
Note:
Black Enhance Overcoat may not be available
depending on the paper being used.
When Black Enhance Overcoat is selected, a larger
margin is printed at the edge of the paper. Selecting
Minimize Top Margin reduces the margins at the edge
of the paper, but also lowers the image quality at these
reduced margins.
For Minimize Top Margin, set Print Quality to Quality
Options, and then set in Quality Options.
c
Important:
If you select Reduce Edge Margins for paper that
curls easily, the paper may rub against the print
head.
Correct color and print
The printer driver automatically and internally corrects
colors to match the color space. You can select from the
following color correction modes.
❏ EPSON Standard (sRGB)
Optimizes the sRGB space and corrects the color.
❏ Adobe RGB
Adobe RGB Optimizes the sRGB space and corrects
the color.
Note that if you click Settings when one of the above
color processing options is selected, you can fine-tune
Gamma, Brightness, Contrast, Saturation, and color
balance for the selected option.
Use this option when the application in use does not
have a color correction function.
SC-P9500 Series/SC-P7500 Series User's Guide
Printing Varieties
64
To Next Page
Need help?
General