Epson SC-P7500 Series User Manual

E
Tape the end to the roll core.
Place tape (available from third-party suppliers)
at the center and then at the left and right ends.
F
Flip the Manual switch on the auto take-up reel
unit to Forward, and take up as much paper as
possible.
After wrapping the paper around the core,
ensure that paper around the core is sufficiently
loose.
Note:
The tensioner supplied with the auto take-up reel
unit is used with some types of paper. Slacken the
paper and insert the tensioner near the center of the
paper as shown. See the following section for
information on paper that requires the tensioner.
U “Epson Special Media Table” on page 156
G
Set the auto take-up reel unit Auto switch to
Forward.
Taking Up the Paper Printable Side In
For information on installing the roll core, see the Setup
Guide for the optional auto take-up reel unit.
SC-P9500 Series/SC-P7500 Series User's Guide
Basic Operations
40

Epson SC-P7500 Series Specifications

General

Brand	Epson
Model	SC-P7500 Series
Category	Printer
Language	English