Network
Wireless
LAN
Standard: IEEE 802.11b/g/n
Security: WPA-PSK (TKIP/AES) WPA2
compliant, WEP (64/128bit)
Frequency
Band:
2.4 GHz
Communicati
on Mode:
Infrastructure, ad hoc
*1
Wi-Fi Direct
*2
Wired
LAN
Standard: Ethernet 100BASE-TX/10
BASE-T
*1: IEEE802.11n is not supported.
*2: IEEE802.11b and IEEE802.11n are not supported.
Ink Specifications
Type Special ink cartridges
Pigment ink Black: Photo Black, Matte Black,
Light Black, Light Light Black
Color: Yellow, Cyan, Light Cyan,
Vivid Magenta, Vivid Light Magenta
Use by date See the date printed on the
package and cartridge (at normal
temperature)
Print quality
guarantee expiry
Six months (after installing in the
printer)
Temperature Uninstalled:
-20 to 40°C (within a month at 40°C)
Installed:
-20 to 40°C (within a month at 40°C)
When packed for transport:
-20 to 60°C (within 1 month at 40°C,
within 72 hours at 60°C)
Cartridge external
dimensions
W 30 x L 93 x H 70 mm
c
Important:
❏ The ink freezes if left at below -10°C for a long
time. If the ink does freeze, leave it at room
temperature (25°C, no condensation) for at
least three hours before use.
❏ Do not refill the ink.
Supported operating systems
Windows Vista/Windows Vista x64
Windows 7/Windows 7 x64
Windows 8/Windows 8 x64
Windows 8.1/Windows 8.1 x64
Mac OS X 10.6.8/10.7.x/10.8.x/10.9.x/10.10.x
Standards and Approvals
U.S. model:
Safety UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B (CAN
ICES-3(B) / NMB-3(B))
This equipment contains the following wireless module.
- Manufacturer: ASKEY Computer Corp.
- Type: WLU6117-D69 (WLU6117-D69 (RoHS))
This product conforms to Part 15 of the FCC Rules and
RSS-210 of the IC Rules.
Epson cannot accept responsibility for any failure to
satisfy the protection requirements resulting from a
non-recommended modification of the product.
To prevent radio interference to the licensed service,
this device is intended to be operated indoors and away
from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:(1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
SC-P800 Series User’s Guide
Appendix
130
To Next Page
Loading...
Need help?
General