C
Place the document on the scanner glass or in
the auto document feeder (ADF).
U “Placing Documents in the Scanner” on
page 110
For information on using the scanner, see the
documentation supplied with the device.
D
Touch Enlarged Copy on the Home screen.
The enlarged copy dialog box is displayed.
Note:
If Enlarged Copy is not displayed on the Home
screen, check the following.
❏ Are the connectors of the USB cable
connecting the printer and scanner inserted
firmly?
❏ Is the power of the scanner on?
❏ Is the scanner a model that supports
enlarged copying?
E
Select the size of the document loaded in the
scanner in Original Size and set the
enlargement setting in Reduce/Enlarge.
If you set Auto Fit Page to On, printing is
performed by automatically enlarging to fit the
width of the roll paper loaded in the printer.
c
Important:
The image quality may decline or streaks
may appear depending on the document or
magnification.
If streaks appear, try performing paper
adjustment.
U “Optimizing Paper Settings (Media
Adjust)” on page 45
If the problem is not resolved, refer to the
scanner manual and then clean the inside of
the scanner.
Note:
If you touch
(Presets), you can assign a name
to frequently used copy settings and then register
them to Presets.
The screen for entering a name can be switched
as shown below with the button marked.
Also, each touch of the following bottom left icon
switches the input method as follows.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
F
Touch the numeric value for the number of
copies and then enter the number of copies in
the keypad screen.
G
Touch to start copying.
Copying can also be started by touching the ]
button of the scanner.
Placing Documents in the
Scanner
Failure to observe the following precautions when
placing the original in the scanner may result in
reduced print quality or scanning failures.
❏ DS-530 is a scanner that scans both sides
simultaneously, but it cannot scan both sides of a
document with enlarged copying. Place the side
you want copying facing downward in the ADF.
❏ Be sure to insert the original in landscape (wide)
orientation.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Making Enlarged Copies with an A3 or A4 Scanner (Except for the SC-T3100M Series)
110
To Next Page
Loading...
Need help?
General