H
Close the cartridge cover and front cover.
For the SC-T3100M Series, close the cartridge
cover and the scanner unit.
Ink charging starts. When the message
Replacement is complete. is displayed, the
procedure is complete.
c
Important:
Do not turn off the printer during ink
charging. Doing so cause insufficient ink
charge resulting in printing faint image or
nothing.
Replacing Maintenance Box
When the message The Maintenance Box is at the
end of its service life. is displayed, you need to replace
the maintenance box.
When the message The Maintenance Box is nearing
the end of its service life. is displayed, prepare a new
maintenance box. Printing is possible until
replacement is instructed.
Supported maintenance box
U “Options and Consumable Products” on
page 205
c
Important:
Do not replace the Maintenance Box while
printing. Waste ink may leak.
Note:
You can replace the Maintenance Box while viewing
the procedure on the screen. To see the guide, from the
Home screen, touch Settings - Maintenance - Replace
Maintenance Box.
A
Open the Maintenance Box cover on the back
of the printer.
B
Pull out the Maintenance Box.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Maintenance
182
To Next Page
Loading...
Need help?
General