Settings item Settings value Explanation
Oversize Add margins (areas of in the following illustration) outside the
output size (areas of
in the following illustration) set in the
Reduce/Enlarge settings. With the actual output size, the margin
sections become larger than the set output size (areas of
in the
following illustration).
Borderless
This is enabled when Roll Paper is selected in Paper Source.
The print data is enlarged slightly in respect to the output size set in
Reduce/Enlarge to print so that margins do not appear inside the
output size. However, if a custom size is set, a margin may appear on
the right side depending on the data.
When printing multiple pages with borderless printing on roll paper,
you can select whether to insert a margin and cut twice between
pages or cut once between pages in the following menu item.
Settings - General Settings - Printer Settings - Paper Source
Settings - Roll Paper Setup - Cut for Borderless Print
Bidirectional
On
*
Setting this to On will cause the print head to print while moving both
left and right. Setting this to Off will reduce the ruled line
misalignment, but printing will take more time.
Off
Color Mode
(SC-T5400 Series/
SC-T3400 Series/
SC-T3400N Series On‐
ly)
EPSON Standard (sRGB) Optimize the sRGB space and correct the color.
Business Graphics
*
Perform color correction to sharpen your images based on the sRGB
space.
GIS Perform color correction suitable for when printing GIS (Geographic
Information System) topographical maps or similar.
Line Drawing Perform color correction suitable for the data of CAD drawings and
other line drawings.
Off (No Color
Management)
Do not perform color correction.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
168
To Next Page
Loading...
Need help?
General