Epson SureLab D3000 - Single Roll User Manual

Troubleshooting
136
Emergency Stop
Shutting down the Printer in an Emergency
If you need to stop the printer in an emergency, performing the following procedure.
A
Press the Power switch on the back of the printer to turn off the printer (the light turns off).
Normally, when you press the Power switch, the power is cut off and the printer turns off. If unusual sounds
and so on do not stop, and the problem is not cleared, go to the following procedure.
B
Disconnect the power cable from the AC inlet on the back of the printer.
This completes this section.

Epson SureLab D3000 - Single Roll Specifications

General

Brand	Epson
Model	SureLab D3000 - Single Roll
Category	Printer
Language	English