Starting up and Shutting down the Printer
23
Shutting down the Printer
Click Post-operation Check on the Client PC to shut down the printer.
When the printer is shut down in Post-operation Check, and Printer PC is connected to the printer, Printer PC
closes automatically.
The Power switch on the back of the printer should normally be On (the light is on). Normally, you do not need to
turn off the Power switch or disconnect the power cable when you finish work. During an emergency, or when not
using the printer for a long time, turn off the Power switch (the light turns off).
A
Close the Printer Information and Settings/Maintenance screens if they are open.
Tip:
You cannot start the Post-operation Check if the Printer Information and Settings/Maintenance screens are open.
To Next Page
Loading...
Need help?
General