Epson SureLab D3000 - Single Roll User Manual

Ejecting Paper
53
Ejecting Paper
This section explains how to eject paper.
Ejected Paper Path
After printing, paper is cut to the specified size, and assigned to the ejected paper path determined by the print size.
When the sorter unit is not installed, all prints are ejected to the tray.
When the sorter unit is installed
Ejected prints on the conveyer are carried to the Side tray or to the sorter.
Tip:
O If the prints are on the sorter tray in the back and cannot be easily reached, press and release the Sorter Drive Switch
to slide the tray forward.
Do not move it manually.
O When there are prints in the tray right at the front, printing stops automatically to prevent prints from falling.
Remove the paper from the sorter tray, and then restart printing.

Epson SureLab D3000 - Single Roll Specifications

General

Brand	Epson
Model	SureLab D3000 - Single Roll
Category	Printer
Language	English