Replacing Paper
26
Replacing Paper
This section explains how to use genuine Epson paper, and how to remove paper from the roll paper feeder and load
new paper.
Genuine Epson Paper
For optimum print quality, we recommend using the following genuine Epson paper.
Professional Photo Paper Glossy
Professional Photo Paper Luster
For more details about genuine Epson paper, see the following sections.
U “Consumables and Optional Products” on page 138
Tip:
O When paper is out, use the paper status lights on the Operation panel to check which roll paper feeder is empty.
O If the edges of the paper are torn, use scissors to cut the paper so that it is straight, and then load the paper.
O You need to make the following preparations if you want to replace the paper with paper of the same width and type.
O Before replacing, make a note of the amount remaining for the current paper
O When replacing the paper, set the amount of paper remaining after replacement from the Client PC
If the remaining amount of paper is not set correctly, the paper level is not displayed correctly.
U “Paper Settings” on page 84
O Rear roll paper feeder operations differ from front roll paper feeder operations. See the following for more
information.
U “Replacing Paper in the Rear Roll Paper Feeder” on page 30
U “Replacing Paper in the Front Roll Paper Feeder” on page 43
O Only the Dual Roll Model supports front roll paper. For the Single Roll Model, see the information for rear roll paper.
To Next Page
Loading...
Need help?
General