Epson TM-L100 User Manual

e pins on the printer t into the positioning holes in the guide.
Using 40 mm Wide Roll Paper
Attach both the 40-mm and 58-mm width roll paper guides.
Follow the procedure below to attach the 40-mm width roll paper guide.
A
Lay the printer on its side.
B
Open the roll paper cover.
C
Tilt the guide and insert its protrusion into the groove inside the printer, and then
t
it into place.
e pin on the printer ts into the positioning hole in the guide.
D
By using TM-L100 Utility, change the paper width setting of the printer to 40 mm.
For more details, see the TM-L100 Technical Reference Guide.
Note:
How to remove the 40-mm width roll paper guide
TM-L100 User's Manual
Setup
18

Epson TM-L100 Specifications

General

Brand	Epson
Model	TM-L100
Category	Label Maker
Language	English