Epson TM-T70-i Technical Reference Guide

20
Push Button
The push button on the lower rear of the printer prints a status sheet or initializes the printer.
•Status sheet printing:
Make sure t hat the printer is turned on, press the push button for approximately 3 seconds.
When you release the button, a status sheet on which network parameters are pr
inted will be
ejected. (See "Confirming with a status sheet" on page 59.)
•Initialization:
Make sure the printer is turned on, press the push button for approximately 10 seconds. When
you release the button, all setting will be initialized. (See "Initializing the Network Setting" on
pa
ge 64.)
Offline
The printer automatically goes offline under the following conditions:
•During power on (including resetting with the interface) until the printer is ready
•During the self-test
•When the roll paper cover is open.
•While roll paper is fed using the FEED button.
•When an error has occurred
Push button

Epson TM-T70-i Specifications

General

Type	POS printer
Character size	1.69 x 3.38 mm
Print technology	Thermal
Wi-Fi	No
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100 Mbit/s
USB connector	Micro-USB, USB Type-A
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Mean cycles between failures (MCBF)	52000000
Internal memory	256 MB
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Voltage	24 V
Product color	Black

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm