Epson TM-T70-i Technical Reference Guide

Chapter 2 Setup
53
2
Network Setting
There are two methods for network settings.
•EPSON TMNet WebCon fig: Set from the computer's web browser
•EPSONNet Config:Set from EPSONNet Config, which is first installed on the computer.
The initial value for the IP address is the value acquired via DHCP. If automated acquisition of
an IP address via DHCP fails, set "192.168.192.168" as the IP address. When the printer
is turned
on, the IP address is acquired automatically and then printed.
The setting method using EPSON TMNet WebConfig is explained here. For more information
about how to use EPSONNet Config, refer to the EpsonNet Config Operations Guide.
Wired LAN Setting
Follow the steps below to set for wired LAN by using EPSON TMNet WebConfig.
 For more information about how to use EPSON TMNet WebConfig, see "EPSON TMNet
WebConfig" on page 73.
 With either connection, wired LAN or wireless LAN, network setting for both the wired
LAN and wireless LAN is possible.
5
6
7
8

Epson TM-T70-i Specifications

General

Type	POS printer
Character size	1.69 x 3.38 mm
Print technology	Thermal
Wi-Fi	No
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100 Mbit/s
USB connector	Micro-USB, USB Type-A
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Mean cycles between failures (MCBF)	52000000
Internal memory	256 MB
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Voltage	24 V
Product color	Black

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm