Epson TM-T70-i Technical Reference Guide

Chapter 2 Setup
69
2
Setting for Connected Devices
Follow the steps below to set for devices controlled by the TM-T70-i printer by using EPSON
TMNet WebConfig.
1
Start up a PC for setting.
2
Connect all the printers to be controlled to the network, and turn them
on.
3
Print a status sheet for each printer.
For how to print a status sheet, see "Confirming with a status sheet" on page 59.
4
Start up the web browser on the PC for setting, and enter the TM-T70-i
printer’s IP address in the address bar as shown below.
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
EPSON TMNet WebConfig starts.
 This printer cannot be deleted from a device.
 The "device ID" for this printer can be changed.
4
5
6
7

Epson TM-T70-i Specifications

General

Type	POS printer
Character size	1.69 x 3.38 mm
Print technology	Thermal
Wi-Fi	No
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100 Mbit/s
USB connector	Micro-USB, USB Type-A
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Mean cycles between failures (MCBF)	52000000
Internal memory	256 MB
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Voltage	24 V
Product color	Black

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm